Q. How do I restore the factory default settings to the Aterm WD701CV modem?

A. In order to restore the factory default settings to the Aterm WD701CV modem, please follow these steps:

1. Unplug the AC adapter from the modem
2. Push a small pin into the "Initialize" button on the back of the modem and then reconnect the power cable
3. Hold the pin for 10 seconds and until the PPP light on the front of the modem begins to flash
4. The router will then restart and after approximately 30 seconds, the factory default settings will be restored

NOTE - This process will delete ALL existing settings in the modem and should only be necessary if you have forgotton your administration password to access the modem's firmware

Tags: aterm, default, factory, modem, settings, wd701cv